•
Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.

Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.


Kit Contents:
  • UTV Snow Plow Blade - County / DOT Style
  • UTV Pushtubes
  • One (1) Reversible Wearbar
  • Rubber Flap
  • Rubber Flap Stabilizer Bar
  • Skid Feet
  • Plow Markers
  • Plow Mount (when added to order)
  • Installation Hardware and Instructions

Blade Features:
  • County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
  • Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
  • Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
  • High strength, high yield 3/16 thick Grade 50 steel wear bar
  • Angled Blade : 16 on the low side; 23 on the high side
  • Rubber flap & stabilizer bar with rubber flap
  • Height AND angle adjustable steel skid feet
  • 3 Year Warranty
  • Designed in the USA

Pushtube Features:
  • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
  • Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
  • Simple detachment system with the pull of a pin
  • Structural tube steel cross bar for added lateral rigidity
  • Quick release pins included
  • 13.5 inches center to center for plow mount tabs
  • Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Pushtube Lift Kits:
  • Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
  • Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)

Optional Hydroturn Features:
  • PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
  • Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
  • Change the blade angle while driving; full radius turn in just 10 seconds
  • Heavy duty chrome plated ¾″ cylinder shaft
  • No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
  • Wire harness utilizes weatherproof connectors

Optional Plow Pulley Fairlead Features:
    • Roller
      •      Replaces the winch fairlead during the plow season
      •      For use with Steel AND Synthetic cables
      •      Curved cable groove helps eliminate flattening and breaking of cable
      •      Bolt Patterns:
      •         Standard Spool: 3″ x 4.875″
      •         Wide Spool: 3" x 6.67″

    • Sheave
      •      Includes pulley, 1/4″ clevis hook and nylon strap
      •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

    Motoalliance

    72" Denali Pro UTV Snow Plow - Polaris General

    SKU BLPro72RE, PTUT, MA11706T-GEN
    $1,236.00
    Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.

    Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.


    Kit Contents:
    • UTV Snow Plow Blade - County / DOT Style
    • UTV Pushtubes
    • One (1) Reversible Wearbar
    • Rubber Flap
    • Rubber Flap Stabilizer Bar
    • Skid Feet
    • Plow Markers
    • Plow Mount (when added to order)
    • Installation Hardware and Instructions

    Blade Features:
    • County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
    • Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
    • Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
    • High strength, high yield 3/16 thick Grade 50 steel wear bar
    • Angled Blade : 16 on the low side; 23 on the high side
    • Rubber flap & stabilizer bar with rubber flap
    • Height AND angle adjustable steel skid feet
    • 3 Year Warranty
    • Designed in the USA

    Pushtube Features:
    • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
    • Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
    • Simple detachment system with the pull of a pin
    • Structural tube steel cross bar for added lateral rigidity
    • Quick release pins included
    • 13.5 inches center to center for plow mount tabs
    • Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

    Pushtube Lift Kits:
    • Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
    • Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)

    Optional Hydroturn Features:
    • PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
    • Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
    • Change the blade angle while driving; full radius turn in just 10 seconds
    • Heavy duty chrome plated ¾″ cylinder shaft
    • No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
    • Wire harness utilizes weatherproof connectors

    Optional Plow Pulley Fairlead Features:
      • Roller
        •      Replaces the winch fairlead during the plow season
        •      For use with Steel AND Synthetic cables
        •      Curved cable groove helps eliminate flattening and breaking of cable
        •      Bolt Patterns:
        •         Standard Spool: 3″ x 4.875″
        •         Wide Spool: 3" x 6.67″

      • Sheave
        •      Includes pulley, 1/4″ clevis hook and nylon strap
        •      Allows greater precision when raising/lowering plow blade and increases the angle of pull
      $1,236.00
      72" Blade Color:
      Push Tube Length:
      Add HydroTurn:

      Frequently Bought Together

      Total price$1,870.00

      Product Description

      Snow doesn't stand a chance against DENALI Pro UTV Snow Plows. Designed in the USA, these heavy duty, County-style 12-gauge steel UTV plow blades make quick work of powder and wet snow. The center mounted design disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. The plow kit includes a reversible wear bar, rubber flap, and skid feet to protect the blade from wear and tear. Dual-layer powder & Polyester paint coat boosts corrosion protection and UV resistance, keeping you plowing for seasons to come.

      Please Note:All DENALI Snow Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend a VIPER Elite, VIPER Max, or VIPER Midnight winch with an automatic brake.


      Kit Contents:
      • UTV Snow Plow Blade - County / DOT Style
      • UTV Pushtubes
      • One (1) Reversible Wearbar
      • Rubber Flap
      • Rubber Flap Stabilizer Bar
      • Skid Feet
      • Plow Markers
      • Plow Mount (when added to order)
      • Installation Hardware and Instructions

      Blade Features:
      • County-style blade (curved design) cuts wet snow & throws powder; made of 12-gauge steel
      • Impact Resistant Reinforcement System, includes leading edge stiffener and vertical stabilizer bar
      • Sand-blasted powder coat with epoxy primer & TGIC Polyester top coat for corrosion protection, UV resistance and durability
      • High strength, high yield 3/16 thick Grade 50 steel wear bar
      • Angled Blade : 16 on the low side; 23 on the high side
      • Rubber flap & stabilizer bar with rubber flap
      • Height AND angle adjustable steel skid feet
      • 3 Year Warranty
      • Designed in the USA

      Pushtube Features:
      • Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength
      • Turn system allows for easy positioning of the blade in 5 different angles - 0, 12.5°, 25°
      • Simple detachment system with the pull of a pin
      • Structural tube steel cross bar for added lateral rigidity
      • Quick release pins included
      • 13.5 inches center to center for plow mount tabs
      • Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

      Pushtube Lift Kits:
      • Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground
      • Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)

      Optional Hydroturn Features:
      • PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System
      • Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid
      • Change the blade angle while driving; full radius turn in just 10 seconds
      • Heavy duty chrome plated ¾″ cylinder shaft
      • No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes
      • Wire harness utilizes weatherproof connectors

      Optional Plow Pulley Fairlead Features:
        • Roller
          •      Replaces the winch fairlead during the plow season
          •      For use with Steel AND Synthetic cables
          •      Curved cable groove helps eliminate flattening and breaking of cable
          •      Bolt Patterns:
          •         Standard Spool: 3″ x 4.875″
          •         Wide Spool: 3" x 6.67″

        • Sheave
          •      Includes pulley, 1/4″ clevis hook and nylon strap
          •      Allows greater precision when raising/lowering plow blade and increases the angle of pull

        Customer Reviews

        Similar Products

        Customers also bought

          Complementary products

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.

            • ITEM BAR TITLE

              Share shipping, delivery, policy information.